Advertisement
Figure
10 - 2: Lug nut sequence of tightening
Tighten the lug nuts to the proper torque for tile axle size on your trailer, to prevent
wheels from coming loose Use a torque wrench to tighten the fasteners
If you do
not have a torque wrench, tighten the fasteners with a lug wrench as much as you
can, then have a service garage or dealer tighten the tug nuts to the proper torque,
Over-tightening will result in breaking tile studs or permanently deforming the
mounting stud holes in the wheels,
Do not exceed 120 ffilb
10.2.10 Suspension
All suspension components should be visually inspected at least every 6000
miles or 6 months, Check for Ioose fhsteners and tighten to proper torque values
Excesivety worn or damaged parts should be replaced with originat parts
5O
Advertisement
