Advertisement
SECTION
3:
FIRS3 TIME
SET-UP REQUIREMENTS
Lug Nuts: Tightening
Sequence,
3brque Requirements
- Before unfbldhag your lrailer, remove the plastic Zip Tie holding the Locking Pin
to the Tongue of the trailer
Do not cut the Lanyard (_rT. ............... -_
Locking Pin
!,_>"....
Lanyard
Lug nuts are prone to loosen al_er initial installation possibly causing
the wheel to separate from the trailer leading to property damage, death
or serious h!jury
• Check lug nuts fk_rtightness on a new trailer or when wheel(s) have
been remounted after the tirst t 0, 25 and 50 miles o[ d_lying and
after any intpact
• Lug nuts lot the tires must be tightened by the user belb_e each use
• Sears cannot be held responsible for damages caused by loosened
lug nuts
• Before towing the Tlailer; you must ensme
the lug nuts are tightened
to the ploper
torque
• "[lie torque requirements
tbr the Lug Nuts are 95 - t20 It,/Ib
Do not exceed
120
ft ilb of torque
Tighten the Lug Nuts in the sequence
below befm*e you leave the
dealer
Tighten
tug nuts
in the fo|lowing
order:
Verify the proper PSI for your tile
• Tire pressure for the t2" _im & tire should be at 80 psi
Foltow posted speed limits but do not exceed 65 mph
12
_efore loading Trailer, Trailer must be propm ly connected to
the Tow Vehicle to stabilize the Trailer
Failure to f611ow this
warning could result in propeily damage, personal injury and
death.
Advertisement
