To Replace The Casing Bli100, Bli200, Bli200X - Husqvarna BLi100 Workshop Manual

6. Push the clips away from the battery pack.
7. Push out the battery connector from the slot.
8. Remove the battery pack. Hold the battery pack at
the ends of the circuit board to prevent short circuit.
WARNING: Do not touch the circuits on the
circuit board.
12 - Repair instructions
9. Remove the clips.
10. Replace all damaged parts.
11. Install the new casing in the opposite sequence.
Note: Push the top cover in the direction of the
casing when you install the screws.
8.3 To replace the casing BLi100, BLi200,
BLi200X
WARNING: Risk of electric shock. Use tools
with electric insulation.
1. Prepare the work area for battery repair work. Refer
To prepare for battery repair work on page 4 .
to
2. Make a note of the serial number. The serial number
is found on the type plate on the removed casing.
1856 - 001 - 14.04.2022