Rollei BULLET HD PRO 1080P User Manual page 6

Mil Charging the battery
Screw out the rear cap
(D
of the Bullet HD and connect the USB charger with
the USB port
(D.
The green light at the USB charger is on while charging and
goes off when the battery is fully charged.
If you charge the battery for the first time charge it for 10 hours before use!
You can record up to 90 minutes with one charge.
Power on/off your BulletHD
Turn BulletHD On
Turn on the Bullet HD by pressing the Power/Shutter button
®
for at
least 3 seconds until the blue LED lights and the red LED flashes once.
The Bullet HD will vibrate once, indicating that it is in standby mode.
Turn BulletHD Off
Turn the Bullet HD off by pressing the Power/Shutter button
(D
in
standby mode for at least 3 seconds. The Bullet HD will vibrate twice,
indicating that it switches off.
Date & Time Setting
There are two ways to set date and time of the Bullet HD:
1. Use the program DateSet.exe from the CD (Windows only).
Run the program by double clicking it and follow the instructions on the
screen. If the device is connected to the computer, the program copies a file
"time.txt" to the memory card with the actual date and time.
2. Use a text file "time.txt" to change date and time. Enter the following text line
into the file "time.txt" (a sample of the file "time.txt" you can find on the CD):
YYYY.MM.DD hh:mm:ss
Y = year h = hour
M = month m = minutes
D = day s = second
Copy the file "time.txt" to the root directory of the memory card and insert the
memory card into the device.
After the Bullet HD is switched on, the date and time is set to the values in the
file "time.txt" and the file will be deleted.
6