Starting Up The Recorder - Toshiba D-R2S Owner's Manual

Basic Setup

Starting up the recorder

After all the necessary connections,
• Turn on the equipment connected to the
recorder.
• Select the corresponding video input on
your television.
Perform these selections whenever you operate
the recorder.
Turning the power on
Press the ON/STANDBY button from the remote
control or on the front panel of the recorder.
ON/STANDBY button
ON/STANDBY indicator
OPEN/CLOSE
DVD
TOP MENU MENU RETURN
SUBTITLE
ANGLE AUDIO CHANNEL
TIMESLIP
INSTANT REPLAY INSTANT SKIP
EASY
NAVI
REC MENU EDIT MENU
LIBRARY CONTENT MENU
When the power turns on, the ON/STANDBY indicator
changes color from red (standby mode) to green
(operation).
After a few seconds, a startup screen appears.
The following icon will appear on the top right corner
of the screen. The icon will continue flashing
momentarily.
e.g.
26
ON/STANDBY button
Loading
While the icon is flashing, the recorder is checking
the status and reading data of the DVD drive for
startup. If the DVD drive does not contain a disc,
the recorder consumes less time to startup,
because it does not need to read data from the
DVD drive.
While the "Loading" icon is flashing, the recorder
cannot respond to any operations of buttons other
than CHANNEL and INPUT SELECT. Operate all
other functions after the icon has disappeared.
Note
• When the recorder is turned on for the first time, the
following menu will be displayed after the "Loading" icon
has disappeared. See "A: Initial settings" (
e.g.
Initial settings
Language
Time & Date setting
TV/Cable
Channel setting
Guide channel setting
Set Top Box setting
Turning the power off
Press the ON/STANDBY button from the remote
control or on the front panel of the recorder.
The "Unloading" icon appears on the right corner of
the top of the screen, and the ON/STANDBY indicator
turns red. Then the power turns off.
Note
• If the recorder freezes for about 15 minutes and will not
respond to any buttons, holding down the ON/STANDBY
button on the front panel for about 10 seconds can force
the recorder to turn off. However, this is an emergency
measure, which contains a risk of damage to data or discs.
Avoid casual use of this measure.
page 28).
English
TV
SETUP