Toshiba D-R2S Owner's Manual page 17

RF IN
(FROM ANT.)
RF OUT
(TO TV)
VHF/UHF
B
A
A/B switch
S-VIDEO
R L VIDEO
INPUT1
CHANNEL
INPUT3
CHANGE
IR R L VIDEO
S-VIDEO
IN
Cable box
S-VIDE
R L VIDEO
IN
CHANNEL
INP
CHANGE
IR R L VIDEO
S-VIDEO
Cable box
3CH
4CH
IN
OUT
DIGITAL AUDIO OUTPUT
BITSTREAM/PCM
Y P P
B R
COMPONENT OUTPUT
OUTPUT
OPTICAL R L VIDEO
S-VIDEO
This set-up will allow you to:
– record an unscrambled or scrambled channel.
– record an unscrambled channel while watching
another unscrambled channel (only when you connect
a cable-compatible TV).
You will need to:
• A/B switch "A": record an unscrambled channel which
bypasses the cable box.
– set "Cable Box/DBS" of "Set Top
Box setting" to "Not used".
37
• A/B switch "B": record a scrambled or unscrambled
channel coming through the cable box.
– set "Cable Box/DBS" of "Set Top
Box setting" to "C.Box".
– set "Select input" of "Set Top Box
setting"to "3CH" or "4CH".
37
You can control cable channels from the recorder.
Preform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder.
2) Set "IR control" of "Set Top Box setting" to "On".
page 37
This set-up will allow you to:
– watch or record a channel through the cable box via
the INPUT1 or INPUT3 (VIDEO/L/R) jacks.
You will need to:
• set "Cable Box/DBS" of "Set Top Box setting" to
"C.Box". page 37
• set "Select Input" of "Set Top Box setting" to "Line1".
page 37
You can control cable channels from the recorder.
Preform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder.
2) Set "IR control" of "Set Top Box setting" to "On".
page 37
page
page 37
page
page 19
page 19
17