Connecting An Antenna And Tv - Toshiba D-KR4 Owner's Manual

Connections

Connecting an antenna and TV

Connect your TV and the antenna to this recorder for recording and to view broadcast programs on the
TV.
1
Disconnect the antenna cable from your TV, and connect it to the RF IN
(FROM ANT.) terminal on the recorder.
2
Using the supplied coaxial cable of this recorder, connect the RF OUT (TO
TV) terminal to the TV.
VHF/UHF antenna
For connecting to a cable box or a satellite system, see
Note
• This connection insures accessibility of broadcast signals to your TV only. Unlike a VCR, you can not assign channel 3 or 4
for playback of this recorder, because an antenna input only passes through in the recorder. You must connect this recorder
to a video input of your TV to enjoy playback picture from this recorder. (See the next page.)
20
Antenna cable (not supplied)
1
To RF IN (FROM ANT.)
2
To RF OUT (TO TV)
Antenna splitter (not supplied)
Types of an antenna terminal may vary
depending on the TV.
Check the type on your TV, and connect
properly using either method as shown.
page 22 to 24.
Coaxial cable (supplied)
2
e.g.
TV
To antenna input
VHF/UHF