Philips DC517 Operating Instructions Manual page 28

MOUNTING INSTRUCTIONS (continued)
3. INSTALLING METAL SLEEVE
3.1 Metal sleeve
Fix metal sleeve into place by pressing the metal tags outwards using a
screwdriver. ;
support bracket should be fitted.
4. CONNECTING RADIO
4.1 Fit antenna adaptor if needed
4.2 Insert aerial plug into aerial adaptor/socket.
4.3 Screw rubber buffer onto fixing stud at rear of set.
4.4 Insert loudspeaker plug B into socket B'.
4.5
4.6
4.7
Insert power supply plug A into socket A'.
(optional) Remove the plastic cover from socket C' and insert the rectangular
plug from the CD* changer or Portable player.
(optional) Line output (4-channel): You can connect a power amplifier (with
additional loudspeakers) to this set. Use the adaptor cable (CINCH) mentioned
in the illustration which is available from your dealer. Insert the rectangular plug
D into socket D'.
5. MOUNTING RADIO
* Slide the radio into the metal sleeve until the springs at either side of the radio
snap into the openings of the sleeve.
¢ Reconnect the negative car battery terminal.
- Installation is now complete.
6. REMOVING RADIO
You can unlock the radio using the two U-shaped brackets supplied.
REPLACING FUSE {see illustration 4)
Pull fuse out of connector block at rear of radio.
Replace with a blade-type fuse of the correct rating.
* only for certain versions.
27