For Your Safety - Craftsman 172.2677 Owner's Manual

Your reciprocating saw has many built-in convenience features for fast, efficient
cutting. These features include an adjustable/pivoting shoe for maximum control
in a variety of cuts. An easy-to-grip rubber boot and a keyless blade clamp for
easy blade changes.
Fig. 1 / Key ess Blade C amp - witch
_\\\\lllr/'_'_..I ,._\ \\\t \ \ Rubber
"'=_ \ __'k\ '_ \ \_--Handle Grip
_A.djus.labLe. I \ \\\\ )
Pivoting Shoe Rubber Boot ___;===.
CAUTION:
THE BLADE GUARD ISTHERE FORYOUR SAFETY.
DO NOT REMOVE IT.
CAUTION:
ALWAYS wear eye protection while operating this
power tool.
USING THE TRIGGER SWITCH TO CONTROL VARIABLE SPEED
This saw is equipped with a variable speed trigger switch. The saw can be
turned ON or OFF by squeezing or releasing the trigger switch.
The speed of the blade can be adjusted by the pressure you
apply to the trigger switch.
1. To increase the speed, apply more pressure to the trigger switch.
2. To decrease the speed, apply less pressure.
Choosing the Correct Speed
The speed you use will depend on the type of materials that you are cutting:
1. Use high speeds for cut'dngwood.
2. Medium speed is best for non-ferrous materials.
3. Low speed is recommended for cuffing metal.
NOTE:Material thickness and blade selection will also affect your speed
selection. As a general rule, as the material thickness increases, the speed
should be slower.
CAUTION:
Use a very slow speed when beginning a cut.Then
increase speed once the cut is started. Prolonged use at a very slow
speed may damage your saw.
8
I
I
I