Daily Use - Whirlpool Adpu7653A Quick Reference Manual

Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator
2
Check the rinse aid indicator to check the
level into the dispenser.
Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause
a fault function of the appliance.
If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6).
Plastic dishes have more difficulty drying and a higher rinse aid setting will not improve the situation.
Detergents with rinse aid incorporated may be effective only with longer programs. In the case of shorter programs, detergent residue may be a problem (if necessary, use powder
detergent). Detergents with rinse aid incorporated tend to form excess suds.
Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier's recommendations
Open the cover A
(press the dedicated button).
3
Visual
indicator
If required,
open the
cover B
(press the
dedicated
button).
(depending on the model)
Rinse aid indicator on the control panel
The indicator lamp lights up when
RINSE AID NEEDS TO BE ADDED.
Insert detergent: Tablet / powder / liquid into the big chamber.
Please look for the recommendation of the detergent manufacturer
on the packaging of the detergent product.
Only fill the detergent
dispenser prior to
starting a wash
program.
Add rinse aid
to the max.
line ~150 ml
Rinse aid indicator on the dispenser
Use only one tablet per one cycle, only
placed in detergent dispenser.
All types of tablets can be used, but for
2 in 1 type adding of salt is mandatory.
Some types of tablets may not dissolve
completely during the short cycles
(Rapid, Fragile, Handwash); placing the
tablet on the tub bottom can help
dissolving and washing.
The rinse aid dosage can be
adjusted to the detergent
used. The lower the setting,
the less rinse aid is dispensed
(factory setting: position 4).
Press the button to open the
cover B. Using a coin or
similar object, turn the arrow
to the desired setting. After
adjusting the rinse aid setting,
shut the cover again.
dark: OK. clear: NEEDS TO BE ADDED
by pressing dedicated ribs.
Daily check

Daily use

Shut the cover
EN -4-