Craftsman 315.175341 Operator's Manual page 5

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpre-
tation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
"L, Alternating Current Type of current
---:- Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
[] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert expose or use damp
Do not
to rain in locations.
Read The Operator's Manual To reduce the risk of injury, the user must read and under
stand the operator's manual before using this product.
O Always wear safety goggles or safety glasses with side
Eye Protection shields and a full face shield when operating this product.
Safety Alert Precautions that involve your safety.
Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
_{_ Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.