PEAKTOP F40364BA Quick Start Manual

Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts. If any parts
are missing or damaged, do not attempt to assemble or use the product. Please contact customer service for replacement.
C ARTON CONTENTS:
Part# Description
01. Body
02. Flowerpot
03. Pump
TOOLS REQUIRED FOR ASSEMBLY:
No tools required

ASSEMBLY INSTRUCTIONS:

1. Unpack the contents of the box and check to make sure that all items are
accounted for and in good condition.
2. Select a flat, level surface for the assembly and final location of your
fountain.
3. Place the body on a horizontal flat surface and the flower pots on the both
sides of the body, (Fig 1)
4. Insert the water supply tube into the pump outlet from the notch at the back
of the body.
5. Add clean water into the body. The water level should be approx. 30mm lower than the edge of the notch.
(Fig 2)
6. Connect the pump power cord to a GFCI outlet. The product will begin to function as intended. You can place plants and flowers (not included) in the
flowerpot as a decorative option. (Fig 3)
7. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing after the initial setup of your fountain. It is
highly recommended that this fountain be placed in an area that will not be damaged should the area come in contact with liquid.
8. Do not leave your fountain running for extended periods of time when no one is present to observe the performance.
9. Check the area around your fountain on a regular basis to ensure that there is no leakage.
NOTE:
The diagrams shown are for illustrative purposes only and are not to scale.

MAINTENANCE OF YOUR FOUNTAIN:

1. Keep water clean - using clean water will reduce mineral deposits and improve water clarity.
2. Clean the fountain periodically to prevent mineral deposits and contamination. Use a wet cloth to gently wipe heavily stained surfaces. Do not use harsh
chemicals or abrasives as this will damage the finished surface and void the warranty.
3. Add clean water periodically to ensure that the pump is fully submersed in water.
4. Disconnect the power and empty the basin if the fountain will not be used for an extended time.
5. If installed outdoors and in a freeze-area of the country, ensure that all water is removed and the unit is completely dry. This product is NOT to be
operated below 41°F (5°C) or freeze damage may occur.
Vendor Item # F40364BA
Target DPCI #: 084 09 3073
Description: Triangle Fountain
Questions, Problems, Missing Parts? Before returning to your retailer,
PLEASE CALL CUSTOMER SERVICE at (866) 728-6187
9am – 5pm EST, Mon – Fri or e-mail customerservice@srg-usa.com.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Quantity
1
2
1