Gas Connection - Electrolux EHG7815X Instruction Booklet

Gas Connection

Gas Connection
Gas Connection
Gas Connection Gas Connection
Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel
or copper.
The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test is
carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.
It is important to install the elbow corr It is important to install the elbow corr
It is important to install the elbow corr It is important to install the elbow corr It is important to install the elbow correctly
on the end of the thread, fitted to the hob connecting pipe. on the end of the thread, fitted to the hob connecting pipe.
on the end of the thread, fitted to the hob connecting pipe. on the end of the thread, fitted to the hob connecting pipe. on the end of the thread, fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of Failure to ensure the correct assembly will cause leakage of Failure to ensure the correct assembly will cause leakage of
Failure to ensure the correct assembly will cause leakage of Failure to ensure the correct assembly will cause leakage of
gas. gas. gas.
gas. gas.
ectly ectly , with the shoulder , with the shoulder
ectly, with the shoulder ectly , with the shoulder , with the shoulder
electrolux 17