The flame is blow out immedi-
ately after ignition
The gas ring burns unevenly
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a
solution to the problem yourself, speak your
dealer or the local Service Force Centre.
If you operated the appliance incorrect-
ly, or the installation was not carried
out by a registered engineer, the visit
from the customer service technician or
Stick it on Guarantee Card and send
Stick it on Guarantee Card and keep
Stick it on instruction booklet
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................
• Burner cap and crown are
• Thermocouple is not heated
• Burner crown is blocked with
MADE IN ITALY
• Make sure that the burner
• After lightning the flame,
• Make sure that the injector is
dealer may not take place free of
charge, even during the warranty peri-
LABELS SUPPLIED WITH THE
Stick the adhesive labels as indicated be-
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are
available at Service Force Centre and ap-
proved spare parts shops.
cap and crown are in correct
keep the knob pushed for
approximately 5 seconds.
not blocked and the burner
crown is clear of food parti-