Advertisement
Console Controls
NOTES:
- Standard switches for Windshield Fluid and Heater Fan
are located on the right side frame console.
- All cab accessories are active only when the tractor
ignition key is set to ACC or ON. All switches will be lit
when power is available to the switch.
- If an individual switch fails to light, it may be an
indication
of a tripped circuit breaker.
1. To operate the wipers, actuate the switch on the
wiper motor body as shown in Figure 1.
2. Turn heater control knob clockwise to increase the air
temperature. See Figure 2.
3. Actuate the blower switch to choose either high or low
speed.
4. Press and hold washer fluid switch to spray the
windshield. *Tip - Adjust washer nozzles with a
needle for best spray
5. See Figure 2 for circuit breaker location. If the
breaker is tripped, the white button will pop out. To
reset simply push the button back in.
HEATER KNOB
COOL
OPERATION
BLOWER
WARM
Figure 2: Console Controls
Figure 1: Wiper Power Switch
WASHER
FLUID
24 of 37
WIPER
SWITCH
5A BREAKER
15A BREAKER
Advertisement
