Accessories - Craftsman 572.6112 Owner's Manual

For availability of all accessories and attachments, refer your local Sear center.
Use only Craftsman, high-performance accessories. Other accessories
WARNING
!
are not designed for this tool and may lead to personal injury or
property damage.
Drywall Cutting Bit
When using a template (outlet box) behind
the drywall, cut in a counterclockwise
direction.
High Speed Router Bits
For routing, inlaying and mortising in wood
and other soft materials. Use only with
Craftsman Router
Shape/Router Table.
A mandrel is a shank with a threaded or
screw head used with polishing accessories,
cutting wheels, sanding discs and polishing
points. The mandrel is a permanent shank,
allowing for replacement of the worn head
when necessary.
Screw Mandrel
For use with the felt polishing
tip and felt polishing wheels.
Aluminum Oxide Grinding
Stones (red/brown)
These grinding stones
come round, pointed or flat
and are made of aluminum
oxide. Use them for every possible grinding
operation: sharpening lawn mower blades,
screwdriver tips, knives, scissors, chisels
and other cutting tools. Use to remove flash
from metal castings, deburring any kind of
metal. These grinding stones can be
resharpened with a dressing stone. In
machine shops, high speed drills and cutters
are normally ground with aluminum oxide
wheels.

ACCESSORIES

Attachment
Mandrels
1/8" shank
1/8" shank
For use with wall tile, cement board and
plaster.
Start the bit into the material at a 45° angle
and then slowly bring it to a 90° angle to
Multipurpose Cutting Bit
For use in wood, plastics, drywall, fiberglass,
vinyl or aluminum siding, acoustical tile and
laminates.
Start the bit into the material at a 45° angle
or
and then slowly bring it to a 90° angle to
begin the cut.
Small Screw Mandrel
Mandrel has a small screw
at the tip and is used with
emery and fiberglass cutting
wheels, sanding discs and
polishing wheels.
Threaded Tip Mandrel
Mandrel has a threaded tip
which threads into the
polishing point accessory
#427.
Silicon Carbide Grinding
Stones (blue/green)
Tougher than aluminum
oxide points, these are made especially for
use on hard materials such as glass and
ceramics.
Diamond Wheel Points
Used for fine detail work on
wood, jade, ceramic, glass
and other hard material. Bits
are covered with diamond
particles.
16
Tile Cutting Bit
1/8" shank
3/32" shank
1/8" shank
1/8" shank