Craftsman 944.511591 Instruction Manual page 7

HARNESS
ADJUSTMENT
FOR BALANCE
6 inches
below 4 - 12
waist inches
above
ground
30i
KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiar-
ize yourself with the location of various controls and adjustments. Save this
manual for future reference.
Hanger j
Blade Shield__ Blade
BLADE
The BLADE is designed for cutting grass,
weeds, and brush up to 1/2 inch (1 cm)
in diameter.
BLADE SHIELD
The BLADE SHIELD provides protection
from the spinning blade.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach-
ments to be installed. The optional at-
tachments are:
Edger ............... 71-51157
Cultivator ............ 71-51158
Blower .............. 71-51160
Pruner .............. 71-51161
_k WARNING: Always disconnect
powerhead spark plug before remov-
ing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal-
ling attachments, place the powerhead
and attachment on a flat surface for
stability.
1. Loosen the coupler by turning the
knob counterclockwise.