Download Print this page

Craftsman ASF 486.246213 Owner's Manual

Tractor brush guard
Hide thumbs Also See for ASF 486.246213:

Advertisement

Quick Links

Owner's Manual
TRACTOR BRUSH GUARD
Model No's. 486.246213, 486.246222 & 486.246232
CAUTION:
Before using this product, read
this manual and follow all Safety
Rules and Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
PRINTED IN U.S.A.
®
STOP
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions Call 1-866-576-8388
• Safety
• Assembly
• Operation
• Maintenance
• Parts
FORM NO. 40865 rev. (04/24/08)

Advertisement

loading

Summary of Contents for Craftsman ASF 486.246213

  • Page 1 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com/craftsman PRINTED IN U.S.A. ® DO NOT RETURN TO STORE For Missing Parts or Assembly...
  • Page 2: Warranty

    WARRANTY ONE YEAR LIMITED WARRANTY When operated and maintained according to the instructions supplied with it, if this Tractor Brush Guard fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME to arrange for free repair.
  • Page 3 INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS STEP 1: (SEE FIGURE 2) Open parts bag labelled "A" and verify that all parts are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. CAUTION! Muffler is hot! Allow engine to cool down before proceeding with bumper installation.
  • Page 4 STEP 3: (SEE FIGURE 4) • Place plug (D) on a work bench or solid table and push end of bumper down onto plug. Repeat for all four plugs. STEP 4: (SEE FIGURE 5) • Attach left mounting bracket to hole shown in left side of tractor frame using a carriage bolt (A) and whizlock nut (C).
  • Page 5 INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS STEP 1: (SEE FIGURE 2) Open parts bags labelled "A" and "B" and verify that all parts are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. CAUTION! Muffler is hot! Allow engine to cool down before proceeding with bumper installation.
  • Page 6 STEP 3: (SEE FIGURE 4) • Place plug (H) on a work bench or solid table and push end of bumper down onto plug. Repeat for all four plugs. STEP 4: (SEE FIGURE 5) IMPORTANT: Do not remove any bolts from the tractor frame while the mower deck is raised.
  • Page 7 STEP 5: (SEE FIGURE 6) • Attach left mounting bracket to hole shown in left side of tractor frame using bolt (C), lock washer (F) and flat washer (G). Align middle hole in bracket with empty hole in tractor frame and tighten bolt (C) to hold bracket in place.
  • Page 8 Get it fixed, at your home or ours! For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.

This manual is also suitable for:

486.246222486.246232