INSTRUCTION
SAFETY
INFORMATION
MANUAL
ON THE U NIT
_DANGER:
Neveruseflailing
de-
vices.
O
DANGER:
Blade can thrust vio-
lently away from material
it does not
cut, Blade thrust can cause amputa-
tion of arms or legs, Keep people and
animals
50 feet (15 meters) away.
_WARNING:
Blade/trimmer
line
can throw objects violently.
You can be
blinded or injured. Wear eye and leg
protection.
ALWAYS WEAR:
__
Eye
Protection
||Le0
G uards
_
8oots
_WARNING:
Hazard zone for
thrown objects.
Blade/trimmer
line can
throw objects violently.
Others can be
blinded or injured. Keep people and
animals
50 feet (15 meters) away.
___
_td
Z°ne
zt
_
41_WARNING:
Do not use trimmer
head as a fastening
device for the
blade.
aWARNING:
The blade continues
to spin after throttle is released or en-
gine is turned off. The coasting
blade
can throw objects or seriously
cut you
if accidentally
touched.
Stop the blade
by contacting
the left hand side of
coasting
blade with material already
cut.
Step coasting
blade by contact
with cut material.
OPERATOR
SAFETY
• Dress properly. Always wear safety
glasses or similar eye protection
when operating,
or performing main-
tenance on your unit (safety glasses
are available).
Eye protection
should
be marked Z87.
• Always wear face or dust mask if op-
eration is dusty.
• Always wear heavy, long pants, long
sleeves, boots, and gloves. Wearing
safety leg guards is recommended.
• Always wear foot protection.
Do not
go barefoot or wear sandals.
Stay
clear of spinning
line/blade.
• Secure hair above shoulder
length.
Secure or remove loose clothing and
jewelry or clothing with loosely hang-
ing ties, straps, tassels, etc. They
can be caught in moving parts.
• Being fully covered also helps pro-
tect you from debris and pieces of
toxic plants thrown by spinning
line/
blade.
• Stay Alert. Do not operate unit when
you are tired, ill, upset or under
influ-
ence of alcohol, drugs, or medica-
tion. Watch what you are doing; use
common sense.
• Wear hearing protection.
3
Need help?
Do you have a question about the 358.792442 and is the answer not in the manual?