Page 1
Model 124A24 Rocket motor ICP® pressure sensor, 1000 psi, 5 mV/psi, water-cooled, 1/2- Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-828-8840 24-hour SensorLine: 716-684-0001 Fax: 716-684-0987 E-mail: info@pcb.com Web: www.pcb.com...
Assistance is needed to safely operate equipment PCB Piezotronics is an ISO-9001 certified company whose Damage is visible or suspected calibration services are accredited by A2LA to ISO/IEC Equipment fails or malfunctions 17025, with full traceability to SI through N.I.S.T.
Page 3
CAUTION Refers to hazards that could damage the instrument. NOTE Indicates tips, recommendations and important information. The notes simplify processes and contain additional information on particular operating steps. The following symbols may be found on the equipment described in this manual: This symbol on the unit indicates that high voltage may be present.
OPERATION MANUAL FOR WATER-COOLED PRESSURE SENSORS MODELS 124A21, A22, A24 Inspect the mounting port for burrs and tool INTRODUCTION marks at the seal surface. The series of sensors described in this guide is designed to measure dynamic pressures in intense thermal environments typified by rocket engine combustion chambers.
5000 psi. low output impedance probes (ICP ) and will not require the extreme insulation resistance The Model 124A24 has a sensitivity of 5.0 precaution commonly associated with charge mV/psi and a full-scale range of 1000 psi. mode sensors.
Need help?
Do you have a question about the 124A24 and is the answer not in the manual?
Questions and answers