TRENDnet TV-IP410 Quick Installation Manual page 7

Note: By default, the IP setting on the TV-IP410/TV-IP410W is set to DHCP.
Please skip to step 9. If you want to give the TV-IP410/TV-IP410W static IP
address, continue on to step 5.
5. Select the camera server and click
Change IP.
6. Configure the IP address to be in
the same subnet as your network,
type in the Administrator ID and
Password and click Change.
By default:
ID:
Password: admin
7. Click OK and wait 30 seconds.
8. Click OK.
admin
English
5