TP-Link TL-WN353G User Manual page 21

Note:
1) Select different authentications and data encryptions, the security configuration is
different.
2) When you select channel manually, the available network authentication are Open
System, Shared key and WPA-None.
3) The RTWCU does not support WPA 802.1x authentication in Windows Vista, while the
Windows Zero Config Tools may satisfy your need.
•
ASCII - Select this option, you can enter any ASCII characters to compose the
password.
•
PASSPHRASE - Select this option, you can enter the characters from 0~9 to compose
the password.
•
Key Index - Select the index of the password.
•
Network Key & Confirm network key - The fields configure the network key. The two
should be the same.
802.1x configure - This configures the 802.1x security, it is available when you select the
data encryption as WPA 802.1X, WPA2 802.1X or WEP 802.1X.
•
EAP TYPE - Select the EAP type for the 802.1x configuration, the options are: GTC, TLS,
LEAP, TTLS, PEAP.
•
Tunnel - Select the tunnel: MD5, GTC, TLS, and MSCHAP-V2. The option is necessary
for the EAP type of TTLS and PEAP.
•
Username - Enter the username for authentication. The option is necessary for the EAP
type of TTLS and PEAP.
•
Identity - Enter the identity for the authentication.
•
Password - Enter the password for the authentication. The option is necessary for the
EAP type of LEAP, TTLS and PEAP.
•
Certificate - Select the certificate you apply.
1. Open System authentication
When you select the Open System as the authentication, the Disabled and WEP can be available
for the data encryption. If you select Disabled, you don't need to configure any passwords. If you
select WEP, you can configure the password as follows.
For example: If the wireless network takes Open System authentication, WEP data encryption,
the password is 64bit with the value of 0123456789. The index is 1.
TL-WN353G 54M Wireless PCI Adapter User Guide
15