Printing Documents - Texas Instruments TI-NSPIRE Software Manual

3. Click to save the document with a new name.
OK

Printing documents

If your computer is connected to a printer, you can print the contents of
an open document. To access the print dialog, do one of the following:
• Select
File > Print
• Press
Ctrl + P
You can also click the Printer icon
prints the contents of the page displayed in the work area.
The Print dialog enables you to select:
• a range of problems to be printed, including all problems in the
document.
• the number of copies to be printed.
• the size of the paper in your printer. The default is Letter in the US
and A4 in Europe.
• the orientation of the printout: portrait or landscape. Landscape is
the default option.
• page scaling, if desired. The default is
visible page on the printout, but some cropping may occur. The
second option,
card.
• the ability to preview what the printout will look like by clicking the
Print Preview button.
Once you have selected the print job parameters, select
Note: If you do not change any print settings, the entire document is
printed, not just the page displayed in the work area.
30
.
.
, prints what is visible on the TI-Nspire™
Print Screen
in the tool bar. This immediately
. The printer fits the
None
Working with Documents
.
Print