Texas Instruments TI-NSPIRE Software Manual page 209

4. Type a maximum value for the sequence, if you want to specify a
maximum.
5. Type a maximum number of values to be generated, if you want to
specify a maximum.
6. Select .
OK
Lists & Spreadsheet shows the formula in the header cell and fills the
column with the results.
Note: If you prefer, you can enter a formula for the sequence directly
into the header cell of the column.
For example, enter
Fibonacci series that uses 2 and 5 as the first two numbers. This sequence
stops at a maximum value of 100 or a maximum of 7 values, whichever
occurs first.
7. Type the formula in the header cell, and then press
example, enter
first two numbers.
Using Lists & Spreadsheet
=seqn(u(n-1)+u(n-2),{2,5},7,100)
=seqn(u(n-1)+u(n-2){2,5})
to generate a
. For
Enter
to use 2 and 5 as the
197