Storage - Briggs & Stratton NAX 200C Instructions Manual


Before transporting the chain saw, replace the chain guard and engage the chain brake.

Carry the chain saw by the front handle to avoid possible injury.

For transport, the saw must be secured with transport belts, and if possible, transport the scythe folded in its original
packaging.

STORAGE

Keep the chain saw in a dry, ventilated and safe place out of reach of children.
If the chain saw is not in use, it should be stored clean, on a flat and dry surface. If the break in operation is longer than 3 months it is
necessary to:

empty and clean the fuel tank,

dispose of fuel in accordance with applicable regulations,

remove the chain and guide bar and clean them by spraying with preservative oil,

thoroughly clean the device, especially the cylinder fins and air filter.
25