Advertisement
Installation
1
Attaching the mounting unit to the
junction box
Attach the mounting unit (AA) to the junction box (not
included) with mounting screws (BB).
NOTE: The pre-installed support screws on the
mounting unit (AA) should protrude out away
from the junction box.
2
Making the electrical connections
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
Connect the black to black (power), the white to white
(neutral), and copper wire to ground wire and secure the
wire nuts (CC) with electrical tape (not included).
If the wires from the fixture are the same color,
NOTE:
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
3
Securing the light fixture to the
junction box
Secure the light fixture (A) to the junction box by placing it
over the pre-installed screws on the mounting unit (AA)
and securing it with the washers (EE) and cap nuts (DD).
Maintain a tight waterproof seal between the
NOTE:
canopy and mounting surface.
AA
AA
A
EE
AA
A
5
Please contact 1-855-HD-HAMPTON for further assistance.
BB
CC
DD
HAMPTONBAY.COM
Advertisement
