Sharp EC-NS16 Operation Manual page 5

Table of Contents

Advertisement

Product and Accessories
1.
ON / OFF SWITCH
With the cord plugged into an
electrical outlet, start or stop the
vacuum cleaner by pressing the
switch.
2.
POWER CONTROL
A slide switch allows the selection
of any cleaning power from "MIN
(for draperies)" to "MAX (for floors)"
3.
DUST INDICATOR
An indicator that will change to red
colour when the dust cup is full.
4.
DUST CUP
Transparent dust container. On spot
control over the dust collected.
5.
CORD REWIND BUTTON
To rewind the cord, press the cord
rewind button while holding the
plug. If the cord is not retracted
completely, pull it out a little and
press the cord rewind button again.
SAVE THESE INSTRUCTIONS
This vacuum cleaner is intended for household use only.
WARNING
Operate this vacuum cleaner only at the voltage specified on the name plate.
SPECIFICATIONS
MODEL
VOLTAGE (AC)
EC-NS16
POWER
CONSUMPTION(MAX)
220V-240V
1600W MAX
6.
AIR SLIDE VALVE
Open the controller on the hose
handle to control air or to release
any items suck in the nozzle.
7.
EXTENSION WANDS
Attach the plastic wands to extend or
shorten the
pipe.
8.
FLOOR NOZZLE
2-WAYS FLOOR NOZZLE
Ideal for the daily cleaning of carpets
and hard floors.
ACCESSORIES
9.
a. Crevice tool
Use for cleaning door tracks,
narrow spots, etc.
b. Small brush
Use for cleaning a sofa.
c. Dusting brush
Use for cleaning a furniture,
Draperies, blinds, lamp shade,
etc.
DUST DISPOSAL SYSTEM
Bagless

Advertisement

Table of Contents
loading

Table of Contents