Download Print this page

Cleaning The Printer (Printer Head/Sensor/Roller) - Sharp XE-A407 Instruction Manual

Hide thumbs

Advertisement

Table of Contents
Cleaning the Printer (Printer Head/Sensor/Roller)
When the printed text is getting dark or faint, paper dust may be stuck to the printer head, sensor and/or
roller. Clean them as follows:
CAUTION: Never touch the printer head with a tool or anything hard as it may damage the head.
The paper cutter is mounted on the printer cover. Be careful not to cut yourself.
Sensor
Roller
Print roller arm
1.
Select the OFF mode.
Printer head
2.
Remove the printer cover.
3.
Lift up the print roller arm.
4.
Remove the paper roll referring to the "Removing a
Paper Jam" section.
5.
Clean the printer head with a cotton swab or soft rag
moistened with ethyl alcohol or isopropyl alcohol.
Clean the roller and the sensor in the same manner.
6.
Reset the paper roll correctly by following the steps in
"Installing Paper Rolls".
109

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Sharp XE-A407

This manual is also suitable for:

Xe-a43s