Changing Language; Configuration Tool - Toshiba e-STUDIO382P User Manual

C
HANGING LANGUAGE
The default language used by your printer for display messages and for report printing is
English. If required, this can be changed to:
NOTE
1. The Operator Panel Language Setup Wizard will run automatically when
you install the printer driver. Follow the instructions provided by this
utility to set your chosen language.
2. The list above is neither conclusive nor exhaustive.
C
ONFIGURATION TOOL
Installation of the Configuration Tool can be found on the Drivers/Utilities DVD under the
Utilities folder. Follow the on-screen instructions to complete the Configuration Tool
installation.This Configuration Tool is used to control and change the various printer
settings.
Using the Configuration Tool
Viewing or changing the printer settings are carried out as follows:
Click on Start > All Programs > TOSHIBA TO > Configuration Tool and select the

Configuration Tool.

German
French
Italian
Spanish
Swedish
Russian
Finnish
Hungarian
Operator panels > 15
Danish
Dutch
Turkish
Portuguese
Polish
Greek
Czech
Norwegian