Removing The Power Supply - Sony VAIO PCV-RS310 Reference Manual

Removing the Power Supply

Remove the power supply when you insert a memory module (see
"Installing Memory Modules"
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.
1
Remove the screw that secures the power supply to the rear of the
chassis.
2
Pull the tab (A) that latches the power supply to the chassis.
3
Slide the power supply up until the power supply clears the chassis.
Removing the power supply
A
4
Rotate the power supply upside down and rest it on top of the chassis
where the hard drive is located.
Upgrading and Maintaining Components
on page 38).
47