Base Screen Of Fax Mode - Sharp MX-4100N Quick Start Manual

BASE SCREEN OF FAX MODE

Touch the [IMAGE SEND] key in the touch panel to open the base screen of fax mode. If the fax screen does not
appear, touch the [Fax] tab.
Select fax settings in the base screen.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) Send mode tabs
Use these tabs to change the mode of the image send
function. To switch to fax mode, touch the [Fax] tab.
(2) [Address Book] key
Touch this key to dial using a one-touch key or group
key. When the key is touched, the address book
screen appears.
(3) [Direct TX] key
Touch this key to send a fax by direct transmission.
When the [Direct TX] key is not highlighted, normal
transmission (memory TX mode) is selected.
(4) [Sub Address] key
Touch this key to enter a sub-address and passcode
for F-code transmission.
(5) Customized keys
The keys that appear here can be changed to show
settings or functions that you prefer.
(6) [Preview] key
Touch to check the image that will be sent in the
touch panel before transmission.
(7) key
Touch this key to retrieve a destination using a search
number.*
* 3-digit number assigned to a destination when it is stored.
(8) [Speaker] key / [Pause] key / [Space] key
Touch this key to dial using the speaker.
When entering a fax number to be dialed, the key
changes to the [Pause] key. When entering a
sub-address, the key changes to the [Space] key.
60
Ready to send.
Scan Internet Fax Fax
Address Book
Original
Scan:
Direct TX
Exposure Auto
Sub Address
Resolution Standard
Address Review Special Modes
File
Quick File
Auto Reception
Preview
Fax Memory:100%
Resend
Speaker
USB Mem. Scan PC Scan
Auto Auto
Send:
(9) [Resend] key / [Next Address] key
The destinations of the most recent eight
transmissions by Scan to E-mail, fax and/or Internet
fax (including Direct SMTP addresses) are stored. To
select one of these destinations, touch the desired
destination. After a destination is selected, this key
changes to the [Next Address] key.
(10) Image settings
Image settings (original size, exposure, resolution)
can be selected.
(11) key
This key appears when a special mode or 2-sided
scanning is selected. Touch the key to display the
selected special modes.
(12) [Special Modes] key
Touch this key to use a special mode.
(13) key / key /
When "Hold Setting for Received Data Print" or
"Received Data Image Check Setting" is enabled in
the system settings (administrator), this will appear
when a fax is received.
: Only "Hold Setting for Received Data Print" is
enabled
: Only "Received Data Image Check Setting" is
enabled
: Both settings are enabled
(14) This shows the currently selected fax reception
mode and the amount of free memory remaining.
( )
(9)
(10)
(11)
(12)
(13)
(14)
key