Menu Items; Displaying The Menu Screen - Sharp PN-E602 Professional LCD Monitor Operation Manual

Displaying the menu screen

Video and audio adjustment and settings of various functions
are enabled. This section describes how to use the menu
items. See pages 21 to 25 for details of each menu items.
Caution
• Do not turn the main power switch off while the menu items
are being displayed. Doing so may initialize the settings.
nExample of operation
(Adjusting CONTRAST in the PICTURE menu)
MENU
1. Press to display the menu screen.
SCREEN SCREEN
PICTURE AUTO
CLOCK
AUDIO
PHASE
SETUP
H-POS
OPTION V-POS
H-SIZE
MULTI
V-SIZE
PIP/PbyP
H-RESOLUTION
V-RESOLUTION
RESET
1 9 2 0 x 1 0 8 0
2. Press or
3. Press or
SCREEN
PICTURE
PICTURE AUTO
ANALOG GAIN
AUDIO
ANALOG OFFSET
BRIGHT
SETUP
CONTRAST
BLACK LEVEL
OPTION
TINT
COLORS
MULTI
SHARPNESS
RGB INPUT RANGE
PIP/PbyP
MOVE OSD···[DISPLAY]
1 9 2 0 x 1 0 8 0
4. Press or
SCREEN PICTURE
PICTURE AUTO
ANALOG GAIN
AUDI O
ANALOG OFFSET
BRIGHT
SETUP
CONTRAST
BLACK LEVEL
OPTION
TINT
COLORS
MULTI
SHARPNESS
RGB INPUT RANGE
PIP/PbyP
MOVE OSD···[DISPLAY]
1 9 2 0 x 1 0 8 0
For items that have
MENU
press .
MENU
5. Press twice to close the menu screen.
20
E

Menu Items

1/1 PC D-SUB
600
25
610
37
50
50
1920
1080
END···[MENU]
V: 60 Hz H: 67.5 kHz
to select PICTURE, and press
to select CONTRAST.
1/2 PC D-SUB
64
86
31
30
30
30
30
12
FULL
OK···[MENU]
V: 60 Hz H: 67.5 kHz
to adjust the setting.
1/2 PC D-SUB
64
86
31
40
30
30
30
12
FULL
V: 60 Hz H: 67.5 kHz
, press , make settings and then
TIPS
• The menu will differ depending on the input mode.
• The menu screen will close automatically if no operation is
performed for about 15 seconds. (DATE/TIME SETTING,
SCHEDULE and LAN SETUP screens will close in about 4
minutes.)
nMenu screen display
SCREEN
PICTURE
AUDIO
SETUP
OPTION
MULTI
PIP/PbyP
1 Name of the menu
2 Input mode
3 An item being selected (highlighted)
4 Screen resolution of input signal, and other data.
.
TIPS
• Items that cannot be selected appear in gray.
(e.g. Function not supported by the current input signal)
nMenu Items
The displayed menu items vary depending on whether or not
the PN-ZB01 (optional) is attached.
The following menus will be displayed only when the PN-ZB01
(optional) is attached.
Menu
SETUP
OPTION
OK···[MENU]
PIP/PbyP PIP SOURCE
1 3
PICTURE 1/2
AUTO
ANALOG GAIN 64
ANALOG OFFSET 86
BRIGHT 31
CONTRAST 30
BLACK LEVEL 30
TINT 30
COLORS 30
SHARPNESS 12
RGB INPUT RANGE
MOVE OSD···[DISPLAY]
1 9 2 0 x 1 0 8 0
V: 60 Hz H: 67.5 kHz
Item
HOT PLUG CONTROL DVI
RS-232C/LAN SELECT
LAN SETUP
AUTO ASSIGN FIXED IP ADDR.
SPEAKER SELECT
INPUT SELECT DVI
BNC
AUDIO SELECT PC DVI-D
PC D-SUB
PC RGB
AV DVI-D
AV COMPONENT (BNC)
AV COMPONENT (D-SUB)
AV S-VIDEO
AV VIDEO (BNC)
AV VIDEO (D-SUB)
2
PC D-SUB
FULL
OK···[MENU]
4