Manager Mode; Entering The Manager Mode; Override Entries - Sharp XE-A507 Instruction Manual

7
Manager Mode
The manager mode is used when managerial decisions must be made concerning register entries, for
example, for overriding limitations and for other various non-programming managerial tasks.
Normal register operations may also be performed in this mode.
NOTE
Entering the Manager Mode
To enter the manager mode, use the following procedure in the REG mode:
Procedure
Manager code
Example
If the code is correct, the register enters the manager
mode.
Override Entries
Programmed limits (such as maximum amounts) for functions can be overridden by placing the register in
the manager mode.
This example presumes that the register has been programmed not to
Example
allow coupon entries over 2.00.
REG-mode entries
Enter to the

manager mode

• When a transaction is finalized, manager is automatically signed off.
NOTE
99
L
The secret code entry box will appear.
Key operation
p
3
....... Error
250 -
l
99 L
250 -
A
When "0" is programmed for the secret code
XXXX
A
Secret code
Display
Print
37