Sharp IG-A40UW Operation Manual page 15

HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
3
IG-A40U
Plasmacluster Ion Generating Unit
without sensor. : 3PCS
Reset button for Plasmacluster Ion Generating Unit
After replacing the Plasmacluster Ion Generating Unit, insert the plug and
press the UNIT RESET Button for 3 seconds.
Pull up the lever
Unit
with sensor (1pc)
E-13
Lift the lever to unlock it.
Pull the lever forward and take out
the Plasmacluster Ion Generating
Unit.
Remove the connector cover.
(4 pcs)
D i s c o n n e c t t h e c o n n e c t o r o f
Plasmacluster Ion Generating Unit.
P u s h a n d u n l o c k t h e
connector, take out the
connector in the direction
of the arrow.
Be sure to replace the Plasmacluster
Ion Generating Units in the proper
locations (with or without sensor) as
indicated in the diagrams.
without
sensor
(3pcs)
Plasmacluster Ion Generating Unit
with sensor. : 1PC