Fcc Compliance Statement For American Users; Emc Standards Applied; Ce Marking; Warning - Epson UB-E02 User Manual

Hide thumbs Also See for UB-E02:
Table of Contents

Advertisement

Obtaining the TMNetWinConfig and the UB-E02 Technical Reference
Guide
For customers from North, Central, or South America, go to the following
web site: http://pos.epson.com/
For customers from other countries, go to the following web site:
http://www.epson-pos.com/
Select the product name from the "Select any product" pull down menu.

EMC Standards Applied

Product Name: UB-E02
Model Name: M155B
The following standards are applied only to the
interface boards that are so labeled. (EMC is tested
using the EPSON power supplies and TM series
printers.)
Europe:

CE marking

North America: EMI:
Japan:
EMC: VCCI Class A
Oceania:
EMC: AS/NZS 3548/CISPR22

WARNING

The connection of a non-shielded printer interface cable
to this board will invalidate the EMC standards of this
device. You are cautioned that changes or
modifications not expressly approved by SEIKO
EPSON Corporation could void your authority to
operate the equipment.
CE Marking
The printer conforms to the following Directives and
Norms:
Directive 89/336/EECEN 55022 Class B
EN 55024
The printers in which this board is installed do not
conform to the following:
Directive 90/384/EEC
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson
Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has
been taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or omissions. Neither is any
liability assumed for damages resulting from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses,
costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's
operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable
products other than those designated as Original EPSON Products or EPSON Approved Products by Seiko Epson Corporation.
EPSON is a registered trademark of Seiko Epson Corporation.
Windows is a registered trademark of Microsoft Corporation, USA.
General Notice: Other product and company names used herein are for identification purposes only and may be trademarks of their
respective companies.
Notice: The contents of this manual are subject to change without notice. Please contact us for the latest information.
FCC/ICES-003 Class A
Class B
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
EN 45501
FCC Compliance Statement
For American Users
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will
be required to correct the interference at his own expense.
FOR CANADIAN USERS
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
CAUTION:

Connecting an outdoor overhead LAN cable

directly to your product
Connecting an outdoor over head LAN cable
directly to your product may lead to lightning
damage. If you need to connect such a cable to
your product, the cable must be protected against
an electrical surge between the cable and your
product. You should avoid connecting your product
to a non-surge protected outdoor overhead LAN
cable.
4

Printed on Recycled Paper

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UB-E02 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents