Download  Print this page

Removing And Replacing The Front Bezel - Lenovo 3000 H100 Hardware Maintenance Manual

Hide thumbs

Advertisement

Removing and replacing the front bezel

5. Slide the computer cover to the rear of the chassis to remove.
Note:
For this procedure, it helps to lay the computer on its side.
To remove and replace the front bezel:
1. Remove the computer cover. Refer to "Removing the computer cover".
Note:
For this procedure, it helps to lay the computer on its side.
2. Remove the front bezel by releasing the three plastic tabs inside the
chassis and push the bezel outward as shown.
Chapter 7. Replacing hardware
41

Advertisement

Table of Contents

   Related Manuals for Lenovo 3000 H100

This manual is also suitable for:

H100Ideacentre k series3000 h

Comments to this Manuals

Symbols: 0
Latest comments: