Setting Up Your Monitor; Connecting And Turning On Your Monitor - Lenovo L2261 Wide Flat Panel Monitor User Manual

Setting up your monitor

This section provides information on how to set up your monitor.

Connecting and turning on your monitor

Note: Be sure to read the Safety information located on page iii before
carrying out this procedure .
1.
2.
Note: One end of the signal cable is already pre-attached to your monitor.
Place the cable into the specific hook indicated in below figure.
3.
Place the cable into the specific hook indicated in below figure.
Power off your computer and all attached devices, and unplug the computer
power cord.
Connect the analog signal cable to the video port on the back of the computer.
Connect the digital cable to the DVI connector of the monitor and the other end
on the back of the computer.
1-4
Chapter 1.