Manually Installing The Monitor Driver; Installing The Monitor Driver In Windows 7 - Lenovo L2261 Wide Flat Panel Monitor User Manual

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft
XP Microsoft Windows Vista Microsoft Windows 7 . Please see the Install Driver ®
section of the Reference and Driver CD for automatic installation.

Installing the monitor driver in Windows 7

To use the Plug and Play feature Microsoft Windows 7, do the following:
Note: You must download file from the Lenovo Monitor CD to use the Plug and Play
feature in Windows 7.
Turn off the computer and all attached devices.
1.
Ensure that the monitor is connected correctly.
2.
3.
Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.
4.
Open the Display Properties window by clicking Start, Control Panel and
Hardware and Sound icon.
5. Click the Appearance and Personalization icon.
6. Click the Display icon.
7.
Click the Monitor Setup icon.
8.
Click the Advanced Settings button.
9.
Click the Monitor tab.
Click the Properties button
10.
11. Click the Driver tab.
Open the "Update Driver Software-Generic PnP Monitor" window by clicking
12.
on Update Driver and then click the "Browse my computer for driver software"
button.
13.
Select "Let me pick from a list of device drivers on my computer".
14.
Click the Have Disk button. Click on the Browse button and navigate to the
following directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).
Select the " LEN L2261wA.inf
15.
Select LEN L2261wA
16.
your hard disk drive.
Close all open windows and remove the CD.
17.
18. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640
x 480 at a refresh rate of 60 Hz.
®
" file and click the Open button. Click the OK button.
and click Next. The files will be copied from the CD to
®
Windows
3-5
Chapter 3.