Connecting To A Wlan And Configuring Network Settings; Connecting To A Wlan - Samsung WB150 User Manual

Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.

Connecting to a WLAN

1
Rotate the mode dial to w.
2
Select , , ,
3
Press [m], and then select AP Setting.
•
In some modes, press [m] or follow the on-screen
instructions until the AP Setting screen appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
AP Setting
Samsung 1
Samsung 2
Samsung 3
Samsung 4
Samsung 5
Back Select
•
Select WPS PBC to connect to a WPS AP.
•
Select Refresh to refresh connectable APs.
•
Select Add wireless network to add an AP manually.
, or .
Wireless network (WB150F/WB151F/WB152F only)
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [t] to open AP setting options
•
When you select a secured AP, a pop-up window appears.
Enter the required passwords to connect to the WLAN. For
information about entering text, refer to "Entering text".
(p. 103)
•
When a login page appears, refer to "Using the login browser".
(p. 101)
•
When you select an unsecured AP, the camera will connect
to the WLAN.
•
If you select a WPS profile supported AP, select WPS PIN,
and then enter a PIN on the AP device. You can also connect
to a WPS profile supported AP by selecting WPS PBC on the
camera, and then pushing the WPS button on the AP device.
100