Using Auto Backup To Send Photos Or Videos; Installing The Program For Auto Backup On Your Pc; Sending Photos Or Videos To A Pc - Samsung ST200F User Manual

Using Auto Backup to send photos or videos

You can send photos or videos that you captured with the camera to a PC wirelessly. The Auto Backup feature works only with the
Windows OS.
Installing the program for Auto Backup on
your PC
1
Install Intelli-studio on the PC. (p. 96)
2
Connect the camera to the PC with the USB cable.
3
Click OK on the pop-up window.
• The Auto Backup program is installed on the PC.
Follow the on-screen instructions to complete the installation
4
Remove the USB cable.
5
Connect the camera to the PC again with the USB
cable.
The camera stores information about the PC, so that the
•
camera can send files to the PC.
Before install program, ensure that the PC is connected to a network. If
no internet connection is available, you must install the program from the
provided CD.

Sending photos or videos to a PC

1
2
3
4
Wireless network (ST200F/ST201F/ST205F only)
On the camera's Home screen, scroll to <Wi-Fi>.
Select .
• You must configure the backup PC information to use the
Auto Backup feature. For more details, refer to "Installing the
program for Auto Backup on your PC".(p. 116)
Press [ ] to set options.
• To turn off your PC automatically after the transfer is complete,
select Shut down PC after backup → On.
Press [ ] to start the backup.
To cancel sending, press [
•
• You cannot select individual files to backup. This function
backs up only new files on the camera.
• The backup's progress will be shown on the PC monitor.
• When the transfer is completed, the camera will turn off
automatically in approximately 30 seconds. Select Cancel
to return to the previous screen and prevent the camera from
turning off automatically.
116
] .