Advertisement
WARNING:
replace the belt. There is a risk of injury.
1. Stop the engine.
2. Remove the V-belt cover.
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
behind a vehicle.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product.
WARNING:
product latches. Do not keep hands on the
lifting point. It can cause injury.
WARNING:
chains or other lifting equipment with rough
14
Be careful when you
Transportation, storage and disposal
Be careful during
Do not tow the product
Make sure that the lifting
Do not walk or stay below
Be careful when the
Do not use metal hooks,
3. Examine the V-belt for damages and wear. Replace
the V-belt if it is necessary.
4. Examine the tension of the V-belt.
5. If the tension is not sufficient, do these steps:
a) Loosen the 4 bolts that hold the engine to the
bottom plate.
b) Move the engine rearward.
c) Make sure that the V-belt pulleys align and
tighten the 4 bolts.
6. Install the V-belt cover.
edges that can cause damage to the lifting
eye.
1. Attach the lifting equipment at the lifting point (A). A
label on the product identifies the correct position.
A
WARNING:
product. Make sure that the vibration
damping units (B) are correctly installed
and not damaged.
B
Do not lift a damaged
2128 - 001 - 30.06.2023
Advertisement
