Toshiba 7130 Resource Manual page 28

28
Adding memory (optional)
11 Pick up the memory module by its sides, avoiding any
contact with its connector. Position the module toward
the socket, aligning the connector's notch with the
matching key in the socket.
latch
key
(Sample Illustration) Aligning the memory module with the socket
12 Firmly press the memory module into the memory slot's
socket at approximately a 30-degree angle (to the
horizontal surface of the computer).
(Sample Illustration) Inserting the memory module into the socket
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
notch
connector
latch