25 watt vhf/fm class d dsc marine transceiver (80 pages)
Summary of Contents for Standard Horizon Quest GX1255S
Page 1
NOAA Weather Alert One-button access to Channel 16 and 9 Access to all US, Canadian and International Channels Versatile User-programmable Scan, Priority Scan and Dual Watch Microphone with Channel Slection. GX1255S QUEST GX1255S 25 Watt VHF/FM Marine Transceiver Owner's Manual...
PRODUCT SUPPORT INQUIRIES If you have any questions or comments regarding the use of the QUEST, you can visit the STANDARD HORIZON Web site to send an E-Mail or contact the Product Support team at 800-767-2450 M-F 7:00-5:00PST. Page 2...
FCC RADIO LICENSE INFORMATION Standard Horizon radios comply with the Federal Communication Commis- sion (FCC) requirements that regulate the Maritime Radio Service. STATION LICENSE An FCC ship station license is no longer required for any vessel traveling in U.S. waters which is under 20 meters in length. However, any vessel re-...
Unauthorized changes or modifications to this equipment may void com- pliance with FCC Rules. Any change or modification must be approved in writing by STANDARD HORIZON. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1.1 INTRODUCTION The STANDARD HORIZON QUEST is a VHF/FM transceiver designed for use in the frequency range of 156.025 to 163.275 MHz. The GX1255S re- quires 13.8V for operation and has a switchable RF output power of 1 watt or 25 watts.
2 ACCESSORIES 2.1 PACKING LIST When the package containing the transceiver is first opened, please check it for the following contents: • GX1255S QUEST Transceiver (with White/Black Microphone) • Mounting Bracket (with attaching hardware and hanger kit) • Owner’s Manual •...
3. If an optional remote extension speaker is to be used, refer to section 4.3 for connections. 4. It is advisable to have a Certified Marine Technician check the power output and the standing wave ratio of the antenna after installation. GX1255S CAUTION Optional Speaker Fuse...
Green Blue Brown Shield White Connection Examples Connect to external 4 Ohm audio speaker Connect to external 4 Ohm audio speaker Connect to NMEA (–) connection of GPS Connect to NMEA ( + ) output of GPS External Speaker GX1255S...
(see Figure 2). 5. Turn the adjusting screw to adjust the tension so that the transceiver is tight against the mounting surface. Bracket Lock-washer nut combination Figure 2. CMB16 Flush Mount Instllation GX1255S Adjusting Screw Page 9...
Immediately recalls channel 16 from any channel location. Holding down this key recalls channel 9. Pressing the 16/9 key again reverts to the previous selected working channel. Secondary use Please see secondary use for the WX key. Page 10 NOTE NOTE GX1255S...
Page 13
Figure 3. Controls and Connectors GX1255S Page 11...
Page 14
UP or DOWN key on radio are pressed, the radio will show the chan- nels programmed in scan memory. This function will not work if the unit is scanning. NOTE: The priority channel is channel 16 only. Page 12 GX1255S...
Page 15
The UP and DOWN keys are used to select a desired channel and to select items in the DSC OPERATION and SETUP menus. The UP or DOWN key on the microphone can also be used to select channels. GX1255S Page 13...
Page 16
UP and DOWN key on the front panel of the transceiver. 16/9 Key Pressing the 16/9 key Immediately recalls channel 16 from any location. Press and hold the 16/9 key to recall channel 9. Pressing the 16/9 key again revert the radio to the previous select channel. Page 14 GX1255S...
The transceiver will automatically go to receive mode, even if the PTT switch is continually held down. Before trans- mitting again, the PTT switch must first be released and then pressed again. GX1255S NOTE Page 15...
2. Press the UP or DOWN key on the microphone or on front panel to select a different NOAA weather channel. 3. To exit from the NOAA weather channels, press the WX key. The trans- ceiver returns to the channel it was on prior to a weather channel. Page 16 NOTE GX1255S...
If the WX key is not pressed the alert tone will be emitted for 5 minutes and then the weather report will be received. The Weather Aleart feature is also engaged while the transceiver is received on the one of the NOAA weather channel. GX1255S NOTE NOTE Page 17...
Triple watch (T/W) means the radio is watching CH70 for DSC Calls. Dual watch (D/W) means the radio is not watching CH70 for DSC Calls. Page 18 NOTE ø CH. 70 MEM CH. NOTE ø CH. 16 CH. 70 GX1255S...
• Channel 16 will be selected when the transceiver is turned on. • WX channel 01 will be recalled when the WX key is pressed. • Key beep will be on. Resetting the microprocessor will not erase DSC MMSI and Directory information. GX1255S (Latitude) NOTE NOTE (Longitude)
INPUT). How can I obtain a MMSI assignment? Contact your dealer, or Standard Horizon for details. This radio is designed to generate a digital maritime distress and safety call to facilitate search and rescue. To be effective as a safety device, this equipment must be used only within communication range of a shore- based VHF marine channel 70 distress and safety watch system.
16 is automatically selected. 8. To cancel the alarm, press any key. When a GPS receiver with NMEA output is connected, the vessel’s po- sition is automatically transmitted with the distress call. GX1255S NOTE Page 21...
9. When an individual call acknowledgment “able to comply” is received, the established channel is automatically selected and an alarm sounds. 10. When an individual call acknowledgment with “unable to comply” is re- ceived, the established channel is automatically selected. Page 22 GX1255S...
3. Press the DOWN key to appear the receiving distress data (MMSI or Station Name). You must continue monitoring channel 16 as a coast station may re- quire assistance in any rescue attempt. Page 24 NOTE • TIME (UTC) • Longitude NOTE NOTE GX1255S...
3. Press the UP or DOWN key to select the receiving dis- tress data: • MMSI or Station Name 4. Monitor the traffic channel for an announcement from the calling ship. This feature is only available when a GPS receiver is connected. GX1255S NOTE Page 25...
3. Select type of reply function “ABLE” or “UNABLE” by using the UP or DOWN key. In the Automatic mode, the acknowledgment is transmitted automatically. 4. Press the PTT on the microphone and talk to the calling ship. Page 26 GX1255S...
3. Select type of reply function ABLE or EXIT by using the UP or DOWN key. 4. When ABLE is selected, press the CALL/SET key. And the requested position coordinates will be transmitted. 5. To exit from position request display, press any key. GX1255S Page 27...
5. Press the CALL/SET key to store the selected level. 6. Press the DOWN key to select “EXIT,” then press the CALL/SET key. 7. Press the DOWN key to select “EXIT,” then press the CALL/SET key to return to the normal operation. Page 28 GX1255S...
5. Press the CALL/SET key to store the selected setting. 6. Press the DOWN key to select “EXIT,” then press the CALL/SET key. 6. Press the DOWN key to select “EXIT,” then press the CALL/SET key to return to the normal operation. GX1255S Page 29...
8. Press and hold the CALL/SET key to store the new name. 9. Press the DOWN key to select “EXIT,” then press the CALL/SET key. 10. Press the DOWN key to select “EXIT,” then press the CALL/SET key to return to the normal operation. Page 30 GX1255S...
7. Press the DOWN key to select “EXIT,” then press the CALL/SET key to return to the normal operation. During Daylight Saving time subtract 1 hour from the offset shown above and enter this offset in step 4 above. GX1255S OFFSET TIME TABLE NOTE Page 31...
11. Press and hold the CALL/SET key to store the MMSI ID code. 12. Press the DOWN key to select “EXIT,” then press the CALL/SET key. 13. Press the UP or DOWN key to select “EXIT,” then press the CALL/SET key to return to the normal operation. Page 32 GX1255S...
6. Press the CALL/SET key to store the selected setting. 7. Press the UP or DOWN key to select “EXIT,” then press the CALL/SET key. 8. Press the UP or DOWN key to select “EXIT,” then press the CALL/SET key to return to the normal operation. GX1255S Page 33...
6. Press the CALL/SET key to store the selected setting. 7. Press the UP or DOWN key to select “EXIT,” then press the CALL/SET key. 8. Press the UP or DOWN key to select “EXIT,” then press the CALL/SET key to return to the normal operation. Page 34 GX1255S...
6. Press the CALL/SET key to store the selected setting. 7. Press the UP or DOWN key to select “EXIT,” then press the CALL/SET key. 8. Press the UP or DOWN key to select “EXIT,” then press the CALL/SET key to return to the normal operation. GX1255S Page 35...
If the user MMSI is enabled more than 2 times, the LCD will show “ER- ROR TOO MANY ENTRIES.” The radio will have to be sent back to Standard Horizon factory Service in order to be able to program in an- other MMSI.
U.S. waters by using channel 9 as the initial contact (hailing) channel for non-emergency communications. Here, also, calling time should not exceed 30 seconds but may be repeated 3 times at 2-minute intervals. GX1255S ” (your vessel’s name). ” (your vessel’s name).
In order to test this system, the NOAA broadcasts the 1050 Hz tone every Wednesday, sometime between 11 AM and 1 PM. Any marine VHF radio that can detect the weather alert tone, may use this test to verify that this feature is functioning properly. GX1255S Page 39...
8.9.1 Distress Call Transmits a DSC Distress message to all radios equipped to receive a DSC Distress call. Some Standard Horizon radios may be connected to a GPS to also transmit the Latitude, Longitude of the vessel. 8.9.2 Individual Call This feature allows the user to contact another vessel capable of using DSC and automatically switch the radio to a desired working channel.
Typically a 3 foot 3dB gain stainless steel whip is used on a sailboat mast. The longer 8 foot 6dB fiberglass whip is primarily used on power boats that require the additional gain. GX1255S Page 41...
You can do this if you follow the directions that come with the connector. Be sure to make good soldered connections. Page 42 1/16'' 3/4'' Adapter 3/4'' 1/8'' 3/8'' 5/8'' GX1255S...
Ensure that the supply voltage to the transceiver does not exceed 16 VDC or fall below 11 VDC. • Use only STANDARD HORIZON-approved accessories and replacement parts. In the unlikely event of serious problems, please contact your Dealer or our repair facility.
9.2 FACTORY SERVICE In the unlikely event that the radio fails to perform or needs servicing, please contact the following: Standard Horizon Factory Service 115 North Wright Brothers Drive Salt Lake City, UT 84116-2838 Telephone (800) 366-4566 Fax No. (801) 359-4122 An “RA”...
Your position is not External cable. displayed. Setting of the GPS navigation receiver. GX1255S TROBLESHOOTING CHART REMEDY Rotate the VOL/PWR knob clock- wise to turn on the transceiver. Check the power cable for DC volt- age, or replace the fuse (6A 250V).
9.4 CONNECTION OF GPS WITH NMEA OUTPUT Manufacturer/Model Wires STANDARD HORIZON Green CP150, CP160 and Brown CP-170C Furuno GP30, 36 White Blue Furuno GP1650, 1850 White Black Garmin Fixed Mounts Blue Black (GND) Garmin Portables Brown Black (GND) JRC GPS500...
And you still must release the push-to-talk switch after each transmission in order to listen to the radio. GX1255S Page 47...
Page 50
State Controlled ( 1 W ) Commercial US: Commercial Coast Guard International: port operations and shipment Port operation U.S. Government Only, Canadian Coast Guard US and Canadian Coast Guard Liaison and Maritime Safety Information Broadcasts announced on channel 16 GX1255S...
Page 51
156.825 156.875 156.875 156.925 161.525 Public Correspondence ( Marine Operator ) , 78A X X 156.925 GX1255S VHF MARINE CHANNEL CHART CHANNEL USE U.S. Government Only Port operation, ship movement U.S. Govermrnt Only, Canadian Coast Guard-Pacific Coast, Commercial Fishing-East Coast Port operation, ship movement Public Coast: Coast Guard;...
Page 52
162.425 Weather ( receive only ) 162.450 Weather ( receive only ) 162.500 Weather ( receive only ) 162.525 Weather ( receive only ) 161.650 Weather ( receive only ) 161.775 Weather ( receive only ) 163.275 Weather ( receive only ) GX1255S...
VERTEX STANDARD), 115 North Wright Brothers Dr, Salt Lake City, Utah 84116-2838. Include proof of purchase indicating model. serial number, and date of purchase. STANDARD HORIZON will return the Product to the pur- chaser freight prepaid. Products purchased prior to January 1, 1991 will bear the STANDARD HORIZON warranty terms in effect prior to that date.
Page 54
This warranty only extends to Products sold within the 50 States of the United States of America and the District of Columbia. STANDARD HORIZON will pay all labor to repair the product and replace- ment parts charges incurred in providing the warranty service except where purchaser abuse or other qualifying exceptions exist.
Page 55
This warranty gives spe- cific legal rights, and there may be other rights which may vary from state to state. ONLY PRODUCTS SOLD ON OR AFTER JANUARY 1, 1991 ARE COV- ERED UNDER THE TERMS OF THIS LIMITED WARRANTY. GX1255S Page 53...
Page 56
Product Support Inquiries If you have any questions or comments regarding the use of the QUEST, you can visit the STANDARD HORIZON Web site to send an E-Mail or con- tact the Product Support team at (714) 827-7600 or (800) 767-2450 M-F 7:00-5:00PST.
Frequency Stability (-20°C to +50°C) ... ±0.0005 % Channel Spacing ... 25 kHz DSC Format ... RTCMSC101 GX1255S (64 H x 160 W x 160 D mm) (50 H x 136 W x 130 D mm) pre-emphasis characteristic at 300 to 3000 Hz...
Page 60
Marine Division of VERTEX STANDARD US Headquarters 10900 Walker Street, Cypress, CA 90630, U.S.A. WWW. standardhorizon.com 0206u-0K Copyright 2002 VERTEX STANDARD CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. GX1255S...