Table of Contents
Advertisement
Quick Links
Models:
50346 — 5", 12,000 RPM
50350 — 7", 6,000 RPM
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools (ANSI B186.1 and B7.1) and any other applicable
WARNING
!
safety codes and regulations. Please refer to Dynabrade's Warning/Safety Operating Instructions for more complete safety information.
52164 Exhaust Cover
52166 Seal
52167
Felt Silencer
52165 Gasket
50424
Bearing Washer
*Bevel Gear
12152
52159 - 6,000 RPM
Bearing
52125 - 12,000 RPM
52117 Spindle
52120 Shim Pack
(3) (as req.)
50431
Bearing
52088
Governor Cage
Spacer
07113 - 6,000 RPM
50412
07124 - 12,000 RPM
Felt Ring
52089
01007 Bearing
Washer
52118
07114 Bearing Plate
Spindle Nut
01673 Pin (2)
Guard
52094 – 5"
52149 – 7"
95897 Screw (5)
50511 Screw (2)
01791 Washer (2)
52180 Clamp
52168 Silencer
01041 Grease Fitting
Governor Spring
52182 - 6,000 RPM
52126 - 12,000 RPM
50463 Governor Valve
50938 Governor Pin (2)
Governor Weight (2)
50399 - 6,000 RPM
52086 - 12,000 RPM
07118 Cylinder
1.2 HP Right Angle Disc Grinder
Air Motor and Machine Parts; with 5/8" male spindle
Housing (Incl. 01041 Fitting)
52114 on 50350
52115 on 50346
52169 Handle Assembly
50471 Spring Holder
95611 Shim (as req.)
50470 Pin
*Sold as a set only
07141 Valve Body
(Incl. 07142 Bushing)
01746 O-Ring
02626 Adj. Bushing
02631 Nut
02658 Packing
07136 Grip
52090 Adapter
07107 Blade (5) (5/pkg.)
01277 Shim (3/pkg.) (as req.)
01036 Bearing
*Bevel Pinion
52158 - 6,000 RPM
95939 Ring
52124 - 12,000 RPM
Parts Page Reorder No. PD96•20
Effective April, 1996
Supersedes 93•21
07142
01697 Inlet Bushing
Bushing
01089 Lever
01017 Pin
07145 Spring
07146 Packing
07168
Valve Stem Assy.
07147 Plug
07106 Rotor/ Shaft Assembly
50435 Key
07119 Bearing Plate
See inside for Important
Operating, Maintenance and
Advertisement
Table of Contents
Related Manuals for Dynabrade 50346
Summary of Contents for Dynabrade 50346
- Page 1 Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools (ANSI B186.1 and B7.1) and any other applicable WARNING safety codes and regulations. Please refer to Dynabrade's Warning/Safety Operating Instructions for more complete safety information. 07142...
- Page 2 2. Some silencers on air tools may clog with use. Clean and replace as required. 3. All Dynabrade air motors should be lubricated with two drops of Dynabrade Air Lube (P/N 95842: 1pt. 473ml.) placed directly into the air inlet with throttle lever depressed every four hours of use.
- Page 3 Mounting Arrangements for 5" and 7" Type 27 Depressed Center Wheels Type 27 Wheels Larger than 5" Diameter Type 27 Wheels — 5" Diameter Important: Dynabrade P/N 11399 Type 27 Wheel Mounting Adapter Kit (included) must be used with all Type 27 Wheels larger than 5" diameter...
- Page 4 ® DYNABRADE DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524 DYNABRADE EUROPE S.àr.l., Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 • Fax: 352 76 84 95 ©...
Need help?
Do you have a question about the 50346 and is the answer not in the manual?
Questions and answers