OPERATION HOW TO OPERATE INSTALLATION Mechanical Installation CAUTION & MAINTENANCE ELECTRICAL CONNECTION SPECIFICATIONS...
Page 3
Also press for more than 2 seconds and release to select frequency automatically for down. LCD DISPLAY Indicates all the functions selected. SCP250 F/CL F/CL SELECT PROGRAM AND FAST FORWARD /REWIND (FF/REW) Press these two knobs simultaneously to change tape side and direction, Press"...
HOW TO OPERATE ST BUTTON(STEREO) Press it for stereo or mono mode. MU BUTTON(MUTE) Press the button will decrease the audio output. BAND BUTTON To select FM1,FM2,FM3 and AM1,AM2, press the "BAND" button and the selected band indication will be displayed on the LCD. TAPE BUTTON 1.
Page 5
INSTALLATION Even through the unit will be mounted in the dashboard, be sure to mount the unit firmly .It is important to make the mounting as sturdy as possible. Use the mounting case and strap bracket. Be sure to use the screws and nuts applied for installation.
Page 6
DETACHING THE FRONT PANEL 1. Press release button and the right hand side of the panel will folded down. SCP250 F/CL Take care not to put pressure on the display or drop the front panel.
REPLACING THE FRONT PANEL Push the front panel into the main body. When replacing the front panel, do not put pressure on the display or control buttons. Front Panel PRECAUTIONS Do not touch the contacts on the front panel or on the unit body, since this way result in poor electrical contact.
WIRING INSTRUCTIONS ANTENNA YELLOW (BACK UP) RED B+ BATTERY B+ BLACK GROUND (-) FUSE GREEN/BLACK PURPLE/BLACK WHITE GREY WHITE/BLACK GREY/BLACK FRONT RIGHT SPEAKER FRONT LEFT SPEAKER GREEN PURPLE REAR RIGHT SPEAKER REAR LEFT SPEAKER Power Output 4x40W CAUTIONS DO NOT CONNECT SPEAKERS (-) TO GROUND &...
Need help?
Do you have a question about the SCP250 and is the answer not in the manual?
Questions and answers