Assembly; Contents Of Parts Bag; Tools Required For Assembly; To Remove Edger From Carton - Craftsman EDGER 536.7974 Operating Instructions Manual

Contents of Parts Bag (shown full size)
(2) - Hex Head Nuts (2)- Hex Head Screws
5/16-18 5/16-18x 1-1/4 inch
(2) - Hair Pins
Parts packed separately in carton (not shown full size)
1 - Container SAE30 Oi1(20 ounces) (1) -Control Rod
1 - Owner's Manual (not shown)
1 - Parts Bag (not shown)
Z..L_CAUTION: Always wear safety
glasses or eye shields while assembling
Edger.
TOOLS REQUIRED FOR ASSEMBLY
1 - 7116inch Wrench
(or adjustable wrench)
2 - 1[2 inch Wrenches
(or adjustable wrenches)
1 - Pair Pliers
The figure to the right shows the Edger .
completely assembled.
References to the right or lett hand side
of the Edger are from the viSwpoint of the
operator's position behind the unit.
TO REMOVE EDGER FROM CARTON
• Remove the control rod and packing
material from carton
• Cut down all four corners of the carton.
Handle
Control Lever
Control Lever
Handle