Sony Ericsson Walkman W980 User Manual page 38

2 Select Yes > New voice command
select a contact. If the contact has
more than one number, select the
number to add the voice command to.
3 Record a voice command such as
"John mobile".
4 Follow the instructions that appear.
Wait for the tone and say the command
to record. The voice command is
played back to you.
5 If the recording sounds OK, select
Yes. If not, select
3 and 4.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example "John mobile". The
phone plays the name back to you
and connects the call.
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
36 Calling
This is the Internet version of the User's guide. © Print only for private use.
and
No and repeat steps
To activate voice answering and
record voice answer commands
1 From standby select
> the General tab >
Voice answer > Activate.
2 Follow the instructions that appear
and select Continue. Wait for the tone
and say "Answer", or say any other
word of your choosing.
3 Select Yes to accept or
recording.
4 Follow the instructions that appear
and select Continue. Wait for the tone
and say "Busy", or say any other word
of your choosing.
5 Select Yes to accept or
recording.
6 Follow the instructions that appear
and select Continue.
7 Select the environments in which you
want to activate voice answering.
To answer a call using voice
commands
• Say "Answer."
To reject a call using voice
commands
• Say "Busy."
Menu > Settings
Voice control >
No for a new
No for a new