Download Print this page

Craftsman 152.213351 Owner's Manual page 11

3/4 horsepower (continuous duty) 1-1/2 horsepower (maximum developed) 600 c.f.m. 3450 r.p.m. (no load r.p.m.) portable dust collector

Advertisement

Available languages

Available languages

Fig. 8
C
D
C
\
\
2,
8,
4,
insert a 5/16-18 x 5/8" hex head screw (C) through
the exhaust flange, exhaust flange gasket and the
exhaust port flange,
See figure 8,
Thread 5/16-18 flange hex nut (D) onto the 5/16=18
x 5/8" hex head screw, do not tighten completely,
See figure 8,
Repeat Steps 1,2, and 3 for the remaining hobs,
Tighten all hardware,
SUPPORT
TUBE ASSEMBLY
MAKE CERTAIN THE DUST COLLECTOR
IS
DISCONNECTED
FROM THE POWER SOURCE.
A
1,
Place support tube clamp (A) over lower support
tube holder (B), See figure 9,
Fig. 10
2,
insert the lower support tube (C) into the lower
support tube holder and tighten support tube clamp,
See figure 10,
3,
Place support tube clamp over top of lower support
tube,
iNTAKE
FUNNEL ASSEMBLY
MAKE CERTAIN THE DUST COLLECTOR
IS
DISCONNECTED
FROM THE POWER SOURCE.
B
A
\
1,
Align the two hobs in the intake support brace (A)
with the two hobs in the intake funnel (B),
See figure 11,
Page 11

Advertisement

loading