Fax And Data Calls - Ericsson R310s User Manual

Fax and Data Calls

Note! To be able to use various communications services
you need the appropriate software such as a fax program,
an e-mail program or an Internet browser.
Sending Fax and Data Calls
All fax and data calls are initiated from the appropriate
computer software. To send fax and data calls you need to
connect your phone to a computer, for example by means
of an infrared modem and then start the appropriate soft-
ware program.
Receiving Fax and Data Calls
The procedure of receiving fax and data calls depends on
your network and subscription. If you have different num-
bers for voice, fax and data calls, this is referred to as multi
numbering. This means that you can have up to three num-
bers in your subscription. If you only have one number for
all call types, this is referred to as single numbering.
Receiving Fax and Data Calls – Multi Numbering
If your network and subscription support multi numbering,
the type of incoming call is shown in the display. There are
two possible calls apart from voice calls:
• Fax calls
• Data calls
The display shows the type of call.
To receive a fax or data call
1. Connect your computer to the phone.
2. Answer the call from within the software program (if it
does not answer automatically).
99