Configure LocationFree TV for DDNS
Make sure your LocationFree TV is connected in the Home/Wireless mode.
In the Settings menu, go to Base station > NetAV Settings > Dynamic DNS.
Enter the following information in the appropriate field.
A User ID
C URL to update DNS information
D URL to detect IP address
E Set button
Settings > Base station > NetAV Settings > Dynamic DNS
Select the Back button and again select Dynamic DNS. Check that the data is showing as
entered. If the data has changed, repeat step 2 on this page. Then check the Current status
field as follows:
Your Dynamic DNS is successfully configured. The system is automatically
checking IP addresses currently assigned to your base station. Wait at least 10
minutes before going to Step 4 on page 9.
The Dynamic DNS configuration failed or communication to the server failed.
Try repeating Steps 1-3 on pages 5 to 8. The update process may take as long as
10 minutes at the DDNS provider. Wait 10 minutes before trying again
The system is still trying to correctly configure. Try waiting a few more minutes;
the current status will soon indicate "success" or "failure." If the Current status
field does not change, repeat Step 2 on page 6.
Enter the Username you registered in DynDNS
Enter the Password you registered in DynDNS
If your registered Host/Domain name is
Select the Set button